These beanbags were Sienna’s and my project yesterday afternoon. Who doesn’t love beanbags? We made one for each letter of her name.
Sienna doesn’t know how to spell yet but she loves counting them and we also play “bean bag horseshoes” with them….trying to toss them as close as we can to a target.
First, I made a square template 6 1/4″ x 6 1/4″ and used it to cut 2 squares from each piece of scrap fabric I had.
I cut 8.5″ x 11″ pieces of freezer paper to run through my printer (there is a file at the bottom of this post with the full alphabet that you can print). I printed out S-I-E-N-N-A in both capital letters and lowercase letters. Then I cut out around the letters and also cut pieces of blank freezer paper to place behind the fabric. I used a razor blade to cut out the letters to make a stencil.
Note: Freezer paper has a waxy side that adheres to the fabric when you iron it on. The non-waxy paper side should be on the side you are going to iron. Make sure to adhere all the edges and your paint won’t go on any area that you’ve ironed the paper onto! Just be careful not to use too much paint on each layer….or the freezer paper will start to unstick if it gets too wet. Do 2-3 light coats of fabric paint!
I ironed each freezer paper stencil onto the front of a piece of fabric (and ironed a blank piece to each back to keep paint from bleeding through).
Then I used Jacquard Fabric Paint to fill in each stencil.
Once dry, I peeled off the freezer paper stencil and voila!
I placed each piece of fabric right sides together and pinned.
Then I started in the middle of one side of a square (do not start on a corner) and I sewed all the way around with a 1/2″ inseam. I stopped 1″ from where I started sewing to leave an opening.
I turned the square right side out and ironed flat (this also heat sets your paint).
Next I top-stitched around the edges of my square making sure to leave an opening where the previous one was (so that there is hole to put the beans through).
I had a great assistant helping to fill the beanbag with dried pinto beans…..
…..until she got a little out of hand and started “bathing” in them.
I filled the beanbag 3/4″ full and then sewed the opening shut!
One cute little beanbag finished!
We plan to do the entire alphabet, but 7 beanbags was all we had time for today!
The applique was made by cutting out the tree from the lighter fabric and adding small round “cherry blossoms” using the pink fabric and small pink buttons. I hand-stitched the detail on the pink cherry blossoms using turquoise DMC thread. I used a white baby gap t-shirt because I like the weight of the fabric and the little scalloped edges.
